2-22
MS-6728 ATX Mainboard
BATT
+
CD-In Connector: JCD1
The connector is for CD-ROM audio connector.
S-Bracket (SPDIF) Connector: JSP1 (Optional)
The connector allows you to connect a S-Bracket for Sony & Philips
Digital Interface (SPDIF). The S-Bracket offers 2 SPDIF jacks for digital
audio transmission (one for optical fiber connection and the other for coaxial),
and 2 analog Line-Out jacks for 4-channel audio output.
To attach the fiber-optic cable to optical SPDIF jack, you need to remove
the plug from the jack first. The two SPDIF jacks support SPDIF output only.
For more information on the S-Bracket, refer to Appendix: Using 4- or 6-Channel
Audio Function.
JCD1
GND L
R
JSP1
1 11
2
12
To Next Page
Loading...
Need help?
General
