2-19
Hardware Setup
MS-7640
Chapter 2
Button
The manboard provdes the followng buttons for you to set the computer’s functon.
Ths secton wll explan how to change your manboard’s functon through the use of
button.
Power Button: POWER1
Ths button s used to turn-on or turn-o the system. Press the button to turn-on or
turn-o the system.
Reset Button: RESET1
Ths button s used to reset the system. Press the button to reset the system.
GreenPower Button: Green Power
Ths button s used to enable/ dsable APS functon of system. Once you press the but-
ton, the system wll turn the APS functon between enabled and dsabled mode.