MSI B75A-G43 seres User Manual

1-11
MS-7758
Chapter 1
CPU & Cooler Installaton
When nstallng a CPU, always remember to nstall a CPU cooler. A CPU cooler s
necessary to prevent overheatng and mantan system stablty. Follow the steps below
to ensure correct CPU and CPU cooler nstallaton. Wrong nstallaton can damage both
the CPU and the manboard.
Unhook and lft the loadng lever to
the fully open poston.
1. The loadng plate should
automatcally lft up as the loadng
lever s pushed to the fully open
poston. Do not touch any of the
CPU socket pns.
2.
Lne up the CPU to 󰘰t the CPU
socket. Be sure to hold the CPU by
the base wth the metal contacts
facng downward. The algnment
keys on the CPU wll lne up wth the
edges of the CPU socket to ensure a
correct 󰘰t.
3. Close the loadng plate and remove
the plastc protectve cap.
4.
Algnment Key

MSI B75A-G43 seres Specifications

General

Chipset	Intel B75
Socket	LGA 1155
Form Factor	ATX
Max Memory	32GB
Memory Standard	DDR3 1066/1333/1600
PCI Express x1	2
PCI Slots	3
SATA 3Gb/s	5
SATA 6Gb/s	1
Audio	Realtek ALC892
USB 3.0	2 x Rear, 2 x Header
LAN	Realtek 8111E
Video Outputs	VGA, DVI, HDMI
Memory Slots	4 x DIMM