3-12
MS-7368 Mainboard
USB Controller
This setting allows you to enable/disable the onboard USB controller.
USB Device Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
Onboard LAN Controller
This item is used to enable/disable the onboard LAN controller.
LAN Option ROM
This item is used to decide whether to invoke the Boot ROM of the LAN controller.
Onboard IEEE1394 Controller
This item allows you to enable/disable the onboard IEEE1394 controller.
HD Audio Controller
This setting is used to enable/disable the onboard audio controller.
Onboard E-SATA Option ROM
This item is used to decide whether to invoke the Option ROM of the E-SATA controller.
Integrated Peripherals
PDF created with pdfFactory Pro trial version www.pdffactory.com