42
Overview of Components
JOC_RT1: OC Retry Jumper
This jumper is used for retrying OC. Once set this jumper to short, the system will
keep retrying OC items until it boot up successfully.
Normal
(default)
Boot with the saved
BIOS settings.
Normal
(default)
Enabled
Apply the BIOS default
settings and lower PCIe
(from CPU) mode for
Safe Boot
Short
(Retry OC)
JOC_FS1: Safe Boot Jumper
This jumper is used for Safe Boot. Once enabled, the system will boot with default
settings and lower PCIe (from CPU) mode.
JTBT1: Thunderbolt Add-on Card Connector
This connector allows you to connect the add-on Thunderbolt I/O card.
1
2 16
15
1 TBT_Force_PWR 2 TBT_S0IX_Entry_REQ
3 TBT_CIO_Plug_Event# 4 TBT_S0IX_Entry_ACK
5 SLP_S3#_TBT 6 TBT_PSON_Override_N
7 SLP_S5#_TBT 8 No pin
9 Ground 10 SMBCLK_VSB
11 DG_PEWake 12 SMBDATA_VSB
13 TBT_RTD3_PWR_EN 14 Ground
15 TBT_Card_DET_R# 16 PD_IRQ#