EasyManuals Logo
Home>MSI>Motherboard>MPG Z790I EDGE WIFI

MSI MPG Z790I EDGE WIFI User Manual

MSI MPG Z790I EDGE WIFI
403 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
35
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Trigger the chassis
intrusion event
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning
1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI MPG Z790I EDGE WIFI and is the answer not in the manual?

MSI MPG Z790I EDGE WIFI Specifications

General IconGeneral
Processor manufacturerIntel
Compatible processor seriesIntel Celeron, Intel Pentium Gold
Supported processor socketsLGA 1700
Non-ECCYes
Memory channelsDual-channel
Number of memory slots2
Supported memory typesDDR5-SDRAM
Maximum internal memory64 GB
Supported memory clock speeds4800, 5000, 5200, 5400, 5600, 5800, 6000, 6400, 6600, 6800, 7000, 7200, 7400, 7600, 7800, 8000 MHz
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Bluetooth version5.3
Top Wi-Fi standardWi-Fi 6 (802.11ax)
Ethernet interface type2.5 Gigabit Ethernet
Number of SATA II connectors0
Number of SATA III connectors4
USB 3.2 Gen 2 (3.1 Gen 2) connectors1
DisplayPort version1.4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
RAID levels0, 5, 10
Internal storage capacity10 GB
Supported storage drive typesHDD & SSD
Supported storage drive interfacesM.2, PCI Express
Cables includedSATA
BIOS typeUEFI AMI
BIOS memory size256 Mbit
Component forPC
Product colorWhite
Motherboard chipsetIntel Z790
Audio output channels7.1 channels
Motherboard form factormini ITX
Windows operating systems supportedWindows 10 x64, Windows 11 x64
Parallel processing technology supportNot supported
Weight and Dimensions IconWeight and Dimensions
Width170 mm

Related product manuals