PCI Interrupt Request Routing
line and pronounced I-R-Q, are hardware lines over The IRQ, abbreviation of interrupt request
which devices can send interrupt signals to the microprocessor. The PCI IRQ pins are typically
connected to the PCI bus INT A# ~ INT D# pins as follows:
Order1 Order2 Order3 Order4
PCI Slot 1 INT B# INT C# INT D# INT A#
PCI Slot 2 INT C# INT D# INT A# INT B#
BIOS Setup
ter and the system will start POST (Power On Self Test) process. When the
restart the
m
Power on the compu
message below appears on the screen, press <DEL> key to enter Setup.
DEL: Setup F11: Boot Menu TAB: Logo
wish to enter Setup,
If the message disappears before you respond and you still
system by turning it OFF and On or pressing the RESET button. You may also restart the syste
by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Main Page
Standard CMOS Features
em configurations, such as time, date etc.
ems of Award special enhanced features.
lues in the chipset registers and optimize your system
ripherals
your settings for integrated peripherals.
settings for power management.
ystem supports PnP/PCI.
Use this menu for basic syst
Advanced BIOS Features
Use this menu to setup the it
Advanced Chipset Features
Use this menu to change the va
performance.
Integrated Pe
Use this menu to specify
Power Management Setup
Use this menu to specify your
PNP/PCI Configurations
This entry appears if your s
H/W Monitor
10
To Next Page
Loading...
Need help?
General
