3-13
BIOS Setup
Integrated Peripherals
USB Controller
Select [Enabled] if your system contains a Universal Serial Bus (USB) controller and
you have USB peripherals.
USB Device Legacy Support
Set to [Auto] if you need to use any USB 1.1/2.0 device in the operating system that
does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
Onboard GigaBit LAN
This setting controls the onboard GigaBit LAN controller.
GigaBit LAN Option ROM
The item enables or disables the GigaBit LAN Option ROM during bootup. Selecting
[Disabled] will speed up the boot process. Setting options: [Enabled], [Disabled].
Onboard IEEE1394 Controller
This setting is used to enable/disable the onboard IEEE 1394 controller.