3-13
BIOS Setup
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip IDE Controller
This item allows you to enable/ disable IDE Controller.
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to use PCI busmastering for read-
ing/ writing to IDE drives.
On-Chip SATA Controller
This item allows users to enable or disable the SATA controller.
RAID mode
Setting this option to [RAID] activates the following fields, and use the following
fields to enable RAID for SATA hard disks.
SATA 1/2/3/4
These items allow you to enable RAID for SATA 1/2/3/4.
I/O Device
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
Select an address and corresponding interrupt for the first serial port.