B-7
nVidia RAID
Installing the RAID Driver (for bootable RAID Array)
1. After you complete the RAID BIOS setup, boot from the Windows CD, and the
Windows Setup program starts. The following illustrations are based on Win-
dows
®
XP environment.
2. Press F6 and wait for the Windows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1)Insert the floppy that has the RAID driver, press S, then press Enter. The
Windows Setup screen appears as below:
(2)Select “NVIDIA RAID CLASS DRIVER” and then press Enter.
(3)Press S again at the Specify Devices screen, then press Enter.
(4)Select “NVIDIA NForce Storage Controller” and then press Enter. The follow-
ing Windows Setup screen appears listing both drivers:
Important
Please follow the instruction below to make an nVIDIA Serial ATA RAID driver
for yourself.
1.Insert the MSI CD into the CD-ROM drive.
2.Click the “Browse CD” on the Setup screen.
3.Copy all the contents in the :\\nVidia\ System \ C72+MCP55\ IDE\
WinXP\ sataraid to a formatted floppy disk.
4.The driver disk for nVIDIA RAID controller is done.
To Next Page
Loading...
Need help?
General
