Advanced
▶Bootup NumLock State
This setting is to set the Num Lock status when the system is powered on. Setting
to [On] will turn on the Num Lock key when the system is powered on. Setting to
[O] will allow users to use the arrow keys on the numeric keypad.
▶Full Logo Display
This BIOS feature determines if the BIOS should hide the normal POST mes-
sages with the motherboard or system manufacturer’s full-screen logo.
When it is enabled, the BIOS will display the full-screen logo during the boot-up
sequence, hiding normal POST messages.
When it is disabled, the BIOS will display the normal POST messages, instead
of the full-screen logo.
Please note that enabling this BIOS feature often adds 2-3 seconds of delay to
the booting sequence. This delay ensures that the logo is displayed for a suf-
cient amount of time. Therefore, it is recommended that you disable this BIOS
feature for a faster boot-up time.
▶Option ROM Messages
This item is used to determine the display mode when an optional ROM is ini-
tialized during POST. When set to [Force BIOS], the display mode used by AMI
BIOS is used. Select [Keep Current] if you want to use the display mode of op-
tional ROM.
To Next Page
Loading...
Need help?
General
