To Next Page

To Previous Page

Chapter 3

3-16BOIS Setup 3-17 BIOS Setup

Trusted Computing

Sets TPM (Trusted Platform Module) function.

TPM SUPPORT [Disabled]

Enables or disables the TPM function to build the endorsement key for accessing

the system.

Chassis Intrusion Configuration

Press <Enter> to enter the sub-menu.

Chassis Intrusion [Disabled]

This function will be available if the chassis equips a chassis intrusion switch.

Once the chassis is opened, the system will record and issue a warning message.

To clear the warning message, set the item to [Reset], then it will return to

[Enabled] later. [Options: Disabled, Enabled, Reset]

Save & Exit

Discard Changes and Exit

Exit BIOS setup without saving any change. This it is used to abandon all changes

and exit BIOS setup.

Save Changes and Reboot

This item is used to save all changes and reboot the system.

Save Changes

This item is used to save current changes.

Discard Changes

This item is used to discard current all changes and restore to the previous values.

Restore Defaults

This item is used to restore/ load all default values by the BIOS vendor.

Boot Override

The installed boot-able devices will appear on this menu, you can select one of them

be a boot device to start booting.

󰁈

Questions and Answers:

Need help?

Do you have a question about the MSI Z87-G43 Series and is the answer not in the manual?

MSI Z87-G43 Series Specifications

General