10
Accessories and tools
Wingspan 850 mm
Overall length 890 mm
All-up weight 225 g
Control channels 4
RC functions Elevator, rudder, aileron, throttle
Flight time 5 min
Specication
Essential accessories
• 1 x Zacki-ELAPOR
®
# 85 2727 # 85 2727
• 1 x Zacki-ELAPOR
®
super liquid # 85 2728 # 85 2728
• 1 x Zacki Activator #1-01032 #1-01032
• UHU
®
POR
• Small cross-point screwdriver
• Balsa knife
• Pointed-nose pliers
• 1 sheet abrasive paper, 320-grit
• 1 mm drill
• 1.5 mm drill
KIT contents
• Colour-printed EPP components for fuselage, wings, tailplane, n
and undercarriage
• CFRP spars for wings and fuselage
• CFRP undercarriage unit
• Wheels
• All plastic parts, small items and linkage components required to
complete the model
• Challenger Indoor Edition power set # 1-01027
• Indoor servo set: 2 x HS-40 & 1 x HS-65HB # 1-01009
• RX-5 light M-LINK 2.4 GHz receiver # 5 5808
• Multiplex ROXXY EVO LiPo 3 - 350B 30C with BID-Chip
# 1-00017
Essential tools and materials
Parts List
Part No.
Quant. Description Material Dimensions
1 1 Challenger building instructions Paper DIN A4
2 1 Model complaint notication Paper DIN A5
3 1 Upper fuselage section EPP Ready made
4 1 Lower fuselage section EPP Ready made
5 1 Fuselage centre section EPP Ready made
6 1 Upper left wing EPP Ready made
7 1 Upper right wing EPP Ready made
8 1 Lower left wing EPP Ready made
9 1 Lower right wing EPP Ready made
10 1 Tailplane EPP Ready made
11 1 Upper left aileron pylon EPP Ready made
12 1 Upper right aileron pylon EPP Ready made
13 1 Lower left aileron pylon EPP Ready made
14 1 Lower right aileron pylon EPP Ready made
15 1 Fin EPP Ready made
16 1 Left wing strut EPP Ready made
17 1 Right wing strut EPP Ready made
18 1 Fuselage in-ll piece EPP Ready made
19 1 Upper wing in-ll piece EPP Ready made
20 1 Lower wing in-ll piece EPP Ready made
EN