National Instruments NI 9423 Getting Started Guide

This document explains how to connect to the NI 9421. In this
document, the NI 9421 with screw terminal, NI 9421 with spring
terminal, and NI 9421 with DSUB are referred to inclusively as
the NI 9421.
Note Before you begin, complete the software and
hardware installation procedures in your chassis
documentation.
Note The guidelines in this document are specific to
the NI 9421. The other components in the system might
not meet the same safety ratings. Refer to the
documentation for each component in the system to
determine the safety and EMC ratings for the entire
system.
Safety Guidelines
Operate the NI 9421 only as described in this document.
Caution Do not operate the NI 9421 in a manner not
specified in this document. Product misuse can result in
a hazard. You can compromise the safety protection
built into the product if the product is damaged in any
2 | ni.com | NI 9421 Getting Started Guide

National Instruments NI 9423 Specifications

General

Brand	National Instruments
Model	NI 9423
Category	Measuring Instruments
Language	English