Set Up Your MXI-Express x1 System 6 ni.com
Installation and Configuration
This section explains how to unpack, install, and configure the
MXI-Express x1 hardware and software.
Unpacking
Your MXI-Express x1 boards are shipped in antistatic packages to prevent
electrostatic damage (ESD) to the devices. ESD can damage several
components on the device.
Caution Never touch the exposed pins of connectors. Doing so may damage the device.
To avoid such damage in handling the device, take the following
precautions:
• Ground yourself using a grounding strap or by holding a grounded
object.
• Touch the antistatic package to a metal part of the computer chassis
before removing the device from the package.
Remove the device from the package and inspect the device for loose
components or any sign of damage. Notify NI if the device appears
damaged in any way. Do not install a damaged device into a computer,
laptop, PXI/CompactPCI, PXI Express/CompactPCI Express,
CompactRIO, or VXI chassis.
Store the device in the antistatic envelope when not in use.
To Next Page
Loading...
Need help?
General
