NI-DAQmx Base Example Programs
NI-DAQmx Base examples are available on the software media, from ni.com/support, and are
accessible from Start»All Programs»National Instruments»NI-DAQmx Base»Examples.
Related Documentation
Each application software package and driver includes information about writing applications
for taking measurements and controlling measurement devices. The following references to
documents assume you have NI-DAQmx 8.7 or later, NI-DAQmx Base 3.x, and where
applicable, version 7.1 or later of the NI application software
Refer to ni.com/manuals for the most recent documentation.
NI-DAQmx
The NI USB-6501 Quick Start included with the NI USB-6501 describes how to install
NI-DAQmx software, install the device, and confirm that your device is operating properly.
The NI-DAQmx Readme is available from the Windows Start menu and lists which application
software, devices, and ADEs are supported by this version of NI-DAQ.
The NI-DAQmx Help is available from the Windows Start menu and contains API overviews,
general information about measurement concepts, key NI-DAQmx concepts, and common
applications that are applicable to all programming environments.
NI-DAQmx Base (Linux/Mac OS X/LabVIEW PDA 8.x)
The Getting Started with NI-DAQmx Base document describes how to install the NI-DAQmx
Base software, the NI-DAQmx Base-supported DAQ device, and how to confirm that the
device is operating properly on your Windows, Linux, or Mac machine. In Windows, select
Start»All Programs»National Instruments»NI-DAQmx Base»Documentation»Getting
Started with NI-DAQmx Base.
The NI-DAQmx Base Readme lists devices supported in different versions of NI-DAQmx
Base. In Windows, select Start»All Programs»National Instruments»NI-DAQmx Base»
DAQmx Base Readme.
The NI-DAQmx Base VI Reference Help contains VI reference and general information about
measurement concepts. In LabVIEW, select Help»NI-DAQmx Base VI Reference Help.
The NI-DAQmx Base C Function Reference Help contains C reference and general
information about measurement concepts. In Windows, select Start»All Programs»National
Instruments»NI-DAQmx Base»Documentation»C Function Reference Help.
Note All NI-DAQmx Base documentation for Linux is installed at /usr/local/
natinst/nidaqmxbase/documentation. All NI-DAQmx Base documentation
for Mac OS X is installed at/Applications/National Instruments/NI-
DAQmx Base/documentation.
12 | ni.com | NI USB-6501 User Guide
To Next Page
Loading...
Need help?
General
