Native Instruments Guitar Rig Kontrol User Manual

GUITAR RIG KONTROL Hardware Reference – 23
The Input Level Meter helps you identify the level of the incoming signal:
Meter Status Meaning
All LEDs are off No incoming signal
Green LEDs ashing Incoming signal
Green and red LEDs ashing Incoming signal is too loud
Before adjusting the input sensitivity, turn up the volume knob on your guitar. Strum some
chords at the volume level you are typically playing at and look at the Input Level Meter:
1. Turn up the input level knob next to the input jack you chose, just until the meter
is reaching the red zone when you play.
2. At that point, slightly turn the knob down until you are safely in the green zone, even
when you are playing really powerful chords.
Now the input sensitivity is set to its optimum level, enabling the RIG KONTROL to provide
the highest dynamical range without clipping.
4.4.2 Connecting a Second Instrument
You can connect different instruments to both input channels, as long as they both provide
a signal at the same level (line or instrument). Just plug the cable of your second instrument
into the other input jack and set the right input level as described in the previous section.
For instruments generating a stereo signal, the second channel needs to be connected
for stereo sound.
%
If only one channel is used, set
the other channel’s Gain knob
to zero.

Native Instruments Guitar Rig Kontrol Specifications

General

Brand	Native Instruments
Model	Guitar Rig Kontrol
Category	Music Pedal
Language	English