Native Instruments TRAKTOR KONTROL S4 Calibration Guide

2. Now imagine the top, flat surface of the jog wheel as the face of a clock.
3. With one finger press at the edge of the top surface of the jog wheel lightly at the 12
o’clock position (see image below). For optimal calibration press as close to the edge
of the flat surface as possible (as shown by the red dot in the image) but do not press
on the rubber outer rim of the wheel.
4.
Release the jog wheel and click NEXT in the Controller Editor calibration window. If the
wheel was pressed correctly the following window is displayed.
Calibration in Controller Editor
Option 1: Calibrate (NEXT button)
TRAKTOR KONTROL S4 - Jog Wheel Calibration Guide - 17

Native Instruments TRAKTOR KONTROL S4 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S4
Category	DJ Equipment
Language	English