E10 MAINTENANCE
The safety and performance of this product can be maintained only if it is inspected
regularly for damage and wear. Pay particular attention to components most susceptible
to wear such as steps, hand grips, and lower side covers.
Remove any damaged machine from service and replace damaged components immediately.
If you have any questions or concerns regarding maintenance or its function, please contact
a Core Fitness Excellence representative at 800-235-2233, or 276-773-2881 outside the
United States.
Cleaning
Do not use glass cleaners or any other household cleaners on the console. Isopropyl alcohol
can be used to moisten a cloth before wiping the console. A lint-free soft cloth must be used as
paper towels can scratch the touchscreen. After cleaning, turn the soft cloth to a dry section
and wipe the console dry.
Inspection
Inspect the frame for rust, bubbling paint, or paint chips during daily cleaning. The salt in
perspiration can damage unpainted surfaces. Repair the damaged area with touch-up paint
purchased from Core Fitness.
Lubrication
The E10 Elliptical Trainer requires periodic lubrication at the points of the left and right foot
pivot shafts. It is recommended to use a multi-purpose grease to ensure your machine has a
long life. Apply the grease directly to the pivot shafts and re-insert them into the Igus bearings.
DAILY WEEKLY MONTHLY 3 MONTH COMMENTS
Check Warning Decals
GENERAL MAINTENANCE
Check Plastic Covers
Check Drive Belt Tension
LUBRICATION
Foot Pivot Shafts
CLEANING
Clean Console
Clean Plastic Covers
Multi-Purpose Grease
110-120 lbs Tension
Use Lint-Free Soft Cloth
And Wipe Dry
Use Mild Soapy Water
And Wipe Dry
X
X
X
X
X
X
To Next Page
Loading...
Need help?
General
