EasyManuals Logo
Home>NEC>Monitor>AccuSync LCD73V

NEC AccuSync LCD73V User Manual

NEC AccuSync LCD73V
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
English
English-11
Specifications AccuSync LCD73V Monitor
Monitor Specifications AccuSync LCD73V Monitor Notes
LCD Module Diagonal: 43 cm/17 inches Active matrix; thin film transistor (TFT)
Viewable Image Size: 43 cm/17 inches liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count): 1280 x 1024 pitch; 270 cd/m
2
white luminance, 500:1
contrast ratio, typical, response time: 8 ms.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colours Analog input: 16,2 M Depends on display card used.
Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz Automatically
Vertical: 56 Hz to 76 Hz Automatically
Viewing Angle Left/Right: -80°/+80° (CR>5)
Up/Down: -60°/+70° (CR>5)
Resolutions Supported Landscape: 720 x 400*
1
: VGA Some systems may not
640 x 480*
1
@ 60 Hz to 75 Hz support all modes listed.
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768*
1
@ 60 Hz to 75 Hz
1152 x 864*
1
@ 70 Hz to 75 Hz
1152 x 870*
1
@ 75 Hz
1280 x 960*
1
@ 60 Hz to 75 Hz Recommended resolution is 60 Hz for
1280 x 1024 @ 60 Hz to 75 Hz................... optimal display performance.
Active Display Area Horizontal: 337.9 mm
Vertical: 270.3 mm
Power Supply 100 - 240 V ~ 50/60 Hz
Dimensions Landscape: 368.0 mm (W) x 381.5 mm (H) x 205.0 mm (D) (with stand)
368.0 mm (W) x 316.5 mm (H) x 60.6 mm (D) (without stand)
Weight 4.0 kg
Environmental Considerations
Operating Temperature: 5 °C to 35 °C
Humidity: 30% to 80%
Altitude: 0 to 3,048 m
Storage Temperature: -10 °C to +60 °C
Humidity: 10% to 85%
Altitude: 0 to 12,192 m
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.

Other manuals for NEC AccuSync LCD73V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC AccuSync LCD73V and is the answer not in the manual?

NEC AccuSync LCD73V Specifications

General IconGeneral
Pixel pitch0.264 mm
Response time8 ms
Display diagonal17 \
Display resolution1280 x 1024 pixels
Vertical scan range55 - 76 Hz
Viewable size diagonal430 mm
Viewing angle, vertical140 °
Contrast ratio (dynamic)-
Contrast ratio (typical)500:1
Display number of colors16.78 million colors
Viewing angle, horizontal160 °
Display brightness (typical)270 cd/m²
CertificationCE; Energy Star; FCC Class B; ISO 13406-2 (Pixel Failure Class II);\\r PCT Gost; TCO03, TÜV ERGONOMIE; TÜV GS; UL/C-UL or CSA; MPR II/ MPR III
Product colorBlack, Grey
Cable lock slotYes
Tilt angle range-5 - 20 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
USB Type-A downstream ports quantity0
Special featuresRapid Response\\r NaViSet and NaViSet Administrator
Power requirements100-240V; 50/60Hz
Recommended resolution1280x1024 @ 60 Hz
Power consumption (standby)2 W
Power consumption (typical)36 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 80 %
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Bezel width (side)14 mm
Depth (with stand)205 mm
Width (with stand)368 mm
Height (with stand)381 mm
Weight (with stand)4000 g
Width (without stand)- mm
Weight (without stand)- g

Related product manuals