EasyManuals Logo
Home>NEC>Monitor>AccuSync LCD73V

NEC AccuSync LCD73V User Manual

NEC AccuSync LCD73V
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
English-8
OSM LOCK OUT
This control completely locks out access to all OSM control functions without Brightness and Contrast. When
attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM are
locked out. To activate the OSM Lock Out function, press “AUTO/ RESET”, then “+” key and hold down
simultaneously. To de-activate the OSM Lock Out, press “AUTO/ RESET”, then “+” key and hold down simultaneously.
RESOLUTION NOTIFIER
If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at
optimal resolution.
DDC/CI
Turns ON or OFF the two way communication and control of the monitor.
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSM Warning
OSM Warning menus disappear with SELECT button.
NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or
when there is a change of input signal or video is inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power is
turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the
Resolution Notifier window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After
the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing,
the Out Of Range menu will appear.

Other manuals for NEC AccuSync LCD73V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC AccuSync LCD73V and is the answer not in the manual?

NEC AccuSync LCD73V Specifications

General IconGeneral
Pixel pitch0.264 mm
Response time8 ms
Display diagonal17 \
Display resolution1280 x 1024 pixels
Vertical scan range55 - 76 Hz
Viewable size diagonal430 mm
Viewing angle, vertical140 °
Contrast ratio (dynamic)-
Contrast ratio (typical)500:1
Display number of colors16.78 million colors
Viewing angle, horizontal160 °
Display brightness (typical)270 cd/m²
CertificationCE; Energy Star; FCC Class B; ISO 13406-2 (Pixel Failure Class II);\\r PCT Gost; TCO03, TÜV ERGONOMIE; TÜV GS; UL/C-UL or CSA; MPR II/ MPR III
Product colorBlack, Grey
Cable lock slotYes
Tilt angle range-5 - 20 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
USB Type-A downstream ports quantity0
Special featuresRapid Response\\r NaViSet and NaViSet Administrator
Power requirements100-240V; 50/60Hz
Recommended resolution1280x1024 @ 60 Hz
Power consumption (standby)2 W
Power consumption (typical)36 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 80 %
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Bezel width (side)14 mm
Depth (with stand)205 mm
Width (with stand)368 mm
Height (with stand)381 mm
Weight (with stand)4000 g
Width (without stand)- mm
Weight (without stand)- g

Related product manuals