NEC AccuSync LCD73V User Manual

English
English-3
Contents
Your new NEC LCD monitor box* should contain the following:
• LCD monitor with tilt base
• Power Cord
• User’s Manual
• CD-ROM
• Base Stand
• Cable Holder
Quick Start
To attach the Base to the LCD Stand:
1. Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1).
2. Attach the Base to the Stand. The locking tab on the Base should fit into the hole on the back of the Stand (Figure S.1).
To attach the Cable Holder:
1. Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and
slide the Cable Holder downward into place (Figure S.1).
NOTE: Please confirm that the tabs are completely secure.
Figure A.1
To attach the LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable connected with the monitor to the connector
of the display card in your system (Figure A.1). Tighten all screws.
For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini
D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.2). Tighten all screws.
NOTE: Some Macintosh systems do not require a Macintosh cable adapter.
User’s Manual Power Cord Base Stand LCD monitor
Captive type (Video signal cable is
connected)
Figure S.1
Base
Locking Tabs
Stand
Figure A.2
Macintosh Cable
Adapter (not included)
CD-ROMCable Holder
Cable Holder
* Remember to save your original box and packing material to transport or ship the monitor.

NEC AccuSync LCD73V Specifications

General

Pixel pitch	0.264 mm
Response time	8 ms
Display diagonal	17 \
Display resolution	1280 x 1024 pixels
Vertical scan range	55 - 76 Hz
Viewable size diagonal	430 mm
Viewing angle, vertical	140 °
Contrast ratio (dynamic)	-
Contrast ratio (typical)	500:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	160 °
Display brightness (typical)	270 cd/m²
Certification	CE; Energy Star; FCC Class B; ISO 13406-2 (Pixel Failure Class II);\\r PCT Gost; TCO03, TÜV ERGONOMIE; TÜV GS; UL/C-UL or CSA; MPR II/ MPR III
Product color	Black, Grey
Cable lock slot	Yes
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
USB Type-A downstream ports quantity	0
Special features	Rapid Response\\r NaViSet and NaViSet Administrator
Power requirements	100-240V; 50/60Hz
Recommended resolution	1280x1024 @ 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	36 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Bezel width (side)	14 mm
Depth (with stand)	205 mm
Width (with stand)	368 mm
Height (with stand)	381 mm
Weight (with stand)	4000 g
Width (without stand)	- mm
Weight (without stand)	- g