NEC ITL-12D-1 User Manual

18
TO LOGIN
When login mode is activated, the telephone
prompts for Login ID and Password.
Enter login code and press Set soft key.
(Station number is used as the Login code.)
Enter the password and press OK Soft key.
If the login code is accepted, display changes to
normal idle status.
TO LOGOUT
Press the preassigned Logout Feature Key on the
terminal.
“LOGOUT?” is displayed on the LCD of the termi-
nal.
Press the Logout Feature Key on the terminal
again.
Note:
This feature is only available for DT700 Series.
DT730/710
Cancel Back Set OK
Password
Login ID
:
:
-
Cancel Back Set OK
Password
Login ID
:
:
2000
Cancel Back Set OK
Password
Login ID
:
:
2000
*****
MIC DND >>>
7:25 AM MON 18 JUL 2008
Note:
This feature is only available for DT700 Series.
Note:
The soft key location is an example.
Note:
Logout button is assigned by data setting at the
ECP (Enterprise Communication Platform).
DT730/710
MIC DND >>>
7:25 AM MON 18 JUL 2008
7:25 AM MON 18 JUL 2008
L-OUT >>>
LOGOUT ?

NEC ITL-12D-1 Specifications

General

Brand	NEC
Model	ITL-12D-1
Category	Telephone
Language	English