NEC MultiSync EA190M User Manual

English-8
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a non-abrasive surface (Figure S.1).
NOTE: Handle with care when monitor facing down, for avoiding damage to the front control buttons.
3. Remove the 4 screws connecting the stand to the monitor (Figure S.1).
NOTE: In order to avoid stand drop, when removing screws, please support stand with your hand.
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your
fingers.
To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up to
the highest position (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape (Figure R.1).
Figure R.1
Figure S.1
Figure S.2
Control buttons
4. Remove the stand (Figure S.2).
5. The monitor is now ready for mounting in an alternate manner.
6. Connect the cables to the back of the monitor.

NEC MultiSync EA190M Specifications

General

Pixel pitch	0.294 x 0.294 mm
Vertical scan range	56 - 75 Hz
Horizontal scan range	31.5 - 81.1 kHz
Compatible operating systems	Windows Vista Premium
Operating relative humidity (H-H)	20 - 80 %
Operating temperature (T-T)	5 - 35 °C
Product color	Black
Panel mounting interface	100 x 100 mm
HD type	SXGA
Display diagonal	19 \
Display brightness	250 cd/m²
Display resolution	1280 x 1024 pixels
Display technology	LCD
Native aspect ratio	4:3
Viewing angle, horizontal	88 °
Power consumption (standby)	0.5 W
Power consumption (typical)	23 W

Weight and Dimensions

Depth (with stand)	213.9 mm
Width (with stand)	408 mm
Height (with stand)	496.4 mm
Weight (with stand)	6600 g
Depth (without stand)	65 mm
Height (without stand)	338 mm
Weight (without stand)	4600 g