To Next Page

To Previous Page

English

English-9

7. Reverse this process to re-attach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Handle with care when removing stand.

NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when

re-attaching stand.

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:

1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2. Using the 4 screws from the stand removal, attach the arm to the monitor (Figure F.1).

NOTE: 1. When mounting, use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor

or stand.

2. The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements,

the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight

of the monitor.

3.The mounting stand must be able to sustain at least 18.4 kg and be UL certified.

“TOP SIDE” mark

Please match top side

of the monitor

Thickness of Bracket (Arm)

2.0~3.2 mm

Weight of LCD assembly: 4.6 kg MAX

100 mm

Figure F.1

4 Screws (M4)

(Max Depth: 14 mm)

Other manuals for NEC MultiSync EA190M

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync EA190M and is the answer not in the manual?

General

Pixel pitch	0.294 x 0.294 mm
Vertical scan range	56 - 75 Hz
Horizontal scan range	31.5 - 81.1 kHz
Compatible operating systems	Windows Vista Premium
Operating relative humidity (H-H)	20 - 80 %
Operating temperature (T-T)	5 - 35 °C
Product color	Black
Panel mounting interface	100 x 100 mm
HD type	SXGA
Display diagonal	19 \
Display brightness	250 cd/m²
Display resolution	1280 x 1024 pixels
Display technology	LCD
Native aspect ratio	4:3
Viewing angle, horizontal	88 °
Power consumption (standby)	0.5 W
Power consumption (typical)	23 W

Weight and Dimensions