English-11
English
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
are as follows:
To access OSD menu, touch any of the control keys.
To change signal input, touch the SELECT key.
NOTE: Exit OSD in order to change signal input.
1 Ambibright Sensor
Human Sensor
Detects the level of ambient lighting and the presence of a user, allowing the monitor to
make adjustments to various settings resulting in a more comfortable viewing experience.
Do not cover this sensor.
2 Power LED Indicates that the power is on or off.
3 Power Turns the monitor on and off.
4 INPUT/SELECT Enters the OSD Control menu. Enters OSD sub menus.
Changes the input source when not in the OSD Control menu.
5 MENU/EXIT Accesses OSD menu. Exits the OSD sub menu. Exits OSD Control menu.
6 LEFT/RIGHT Navigates to the left or right through the OSD Control menu.
You can adjust the BRIGHTNESS directly while the OSD menu is off*
1
.
7 UP/DOWN Navigates up or down through the OSD Control menu.
You can adjust the VOLUME directly when not in the OSD Control menu*
1
.
8
/RESET Resets the OSD controls back to factory settings.
Selects MULTI PICTURE when OSD menu is off*
1,
*
2
.
Selects ACTIVE PICTURE when OSD menu is off and MULTI PICTURE is ON*
1,
*
3
.
*
1
When Hot Key function is OFF, this function is disabled.
*
2
Opens MULTI PICTURE menu.
*
3
Opens ACTIVE PICTURE menu of each PICTURE PATTERN setting.
Showing MULTI PICTURE is OFF.
Indicating MULTI PICTURE is ON.
For the ACTIVE PICTURE when PICTURE PATTERN is 2 split screen (CENTER or AUTO).
Indicating MULTI PICTURE is ON.
For the ACTIVE PICTURE when PICTURE PATTERN is 3 split screen.
Indicating MULTI PICTURE is ON.
For the ACTIVE PICTURE when PICTURE PATTERN is 4 split screen.
To Next Page
Loading...
Need help?
General