8
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm.
To mount the monitor to a flexible arm:
1. Remove the stand (see Remove Monitor Stand for Mounting page 7).
2. Use the 4 screws that are included to
attach the arm to the monitor
(Figure F.1).
Quick Start – continued
CAUTION: Use ONLY the 4 screws that are included when mounting to avoid damag-
ing the monitor and the stand or arm. For safety requirements, the monitor
must be mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor. The LCD monitor should only be
used with an approved arm (e.g. GS mark).
(Figure F.1)
100mm
100mm
To Next Page
Loading...
Need help?
General