NEC MultiSync LCD1990SXi User Manual

6
Quick Start – continued
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid accidental-
ly damaging the screen and to avoid pinching fingers. To raise the screen, place
hands on each side of the monitor and lift up to the highest position (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and turn clock-
wise from Landscape to Portrait or counter-clockwise from Portrait to Landscape
(Figure R.1).
Note:
To toggle the orientation of the OSM menu between Landscape and
Portrait modes, refer to the “Controls” section of this user’s manual.
Swivel
Grasp both sides of the monitor screen
with your hands and adjust the swivel
as desired (Figure TS.2).
Tilt
Grasp top and bottom sides of the monitor
screen with your hands and adjust the tilt
as desired (Figure TS.1).
NOTE: Handle with care when tilting and swiveling the monitor screen.
Figure R.1
Figure TS.1
Figure TS.2

NEC MultiSync LCD1990SXi Specifications

General

Brand	NEC
Model	MultiSync LCD1990SXi
Category	Monitor
Language	English