To Next Page

To Previous Page

English-17

English

You can connect your stereo ampliﬁer to your LCD monitor. Refer to your ampliﬁer’s owner’s manual for additional information.

Connecting to a Stereo Ampliﬁer

• Turn on the LCD monitor and the ampliﬁer only after all connections have been made.

• Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the ampliﬁer.

• Do not reverse the audio left and right jacks.

• The AUDIO IN used for audio input.

• The AUDIO OUT jack outputs sound from the Audio input device (VCR) selected by the LCD monitor to the

external output device (stereo ampliﬁer).

Connections -continued

Denotes an AV unit function.

All AV functions are enabled when the AV unit is installed.

LCD monitor

VCR or Laser disc player

To audio left output

To audio right output

To audio left input

To audio right input

Ampliﬁer

External speaker External speaker

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync LCD3210 and is the answer not in the manual?

NEC MultiSync LCD3210 Specifications

General

I/O ports	1 x D-sub 15 pin in/out 5 x BNC 1 x Cinch out 2 x Cinch in
Pixel pitch	0.511 x 0.511 mm
Power requirements	100-120 V/220-240 V; 1.4 A/0.6 A
Vertical scan range	58 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Headphone connectivity	3.5 mm
Operating relative humidity (H-H)	20 - 80 %
Response time	18 ms
Display diagonal	32 \
Display brightness	500 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewable size diagonal	800 mm
Contrast ratio (typical)	600:1
Display number of colors	16.78 million colors
Operating temperature (T-T)	5 - 40 °C
Certification	CE; TÜV GS; C-tick; FCC Class B; UL/C-UL or CSA; CCC; PSB; VCCI; Ro
RS-232 ports	1
Product color	Silver
Panel mounting interface	600 x 200 mm
Power consumption (typical)	110 W
RMS rated power	14 W
Number of speakers	2

Weight and Dimensions