NEC MultiSync LCD3215 User Manual

English-4
Contents
Power Cord*
1
Setup Manual
Video Signal Cable
(Mini D-SUB 15 pin to
Mini D-SUB 15 pin)
Wireless Remote Control
and AAA Batteries
Clamp x 2
Your new MultiSync monitor box* should contain the following:
• LCD monitor
• Power Cord*
1
•Video Signal Cable
• Setup Manual
•Wireless Remote Control and AAA Batteries
• Main switch cover
• Clamp x 2
• Screw for clamp (M4 x 8) x 2
• Screw for main switch cover (3 x 10) x 2
• CD-ROM
• Thumbscrew for stand x 2 (LCD4215 only)
CD-ROM
Screw for clamp
(M4 x 8) x 2
*
1
Type and number of power cords included will depend on the where the LCD monitor is to be shipped. When more than
one power cord is included, please use a power cord that matches the AC voltage of the power outlet and has been
approved by and complies with the safety standard of your particular country.
* Depending on where the LCD is sold, the stand may or may not be included with some models.
* Remember to save your original box and packing material to transport or ship the monitor.
Thumbscrew for stand x 2
(LCD4215 only)
Setup Manual
Main switch cover
Screw for main switch
cover (3 x 10) x 2

NEC MultiSync LCD3215 Specifications

General

Pixel pitch	0.511 x 0.511 mm
Aspect ratio	16:9
Response time	9 ms
Display diagonal	32 \
Display resolution	1360 x 768 pixels
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Display brightness (typical)	500 cd/m²
Audio input	Yes
DVI-D ports quantity	1
DVI-I ports quantity	0
Product color	Black
Market positioning	-
Panel mounting interface	400 x 200 mm
Power consumption (typical)	115 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth (without stand)	133 mm
Width (without stand)	789 mm
Height (without stand)	476.3 mm
Weight (without stand)	13100 g