English-7
English
Cord or chain
b. Prevent Tipping
When using the display with the optional tabletop stand,
fasten the LCD to a wall using a cord or chain that can
support the weight of the monitor in order to prevent the
monitor from falling. Fasten the cord or chain to the monitor
using the eyebolts (M8).
When using eyebolts (M8) for prevent the monitor from
falling, attach the eyebolts (M8) to backside position, as
shown below.
NOTE: Before attaching the LCD monitor to the wall,
make sure that the wall can support the weight of
the monitor.
Be sure to remove the cord or chain from the wall
before moving the LCD.
Do not use the eyebolt (M8) except in prevent
tipping.
Allow adequate ventilation or provide air conditioning around
the monitor, so that heat can properly dissipate away from
the unit and mounting apparatus; especially when you use
monitors in multiple screen.
3. Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the
enclosure to allow heat to disperse, as shown below.
Handle with care when installing optional stand and avoid
pinching your fingers or feet.
Eyebolt (M8)
Washer for Eyebolt (M8)
To Next Page
Loading...
Need help?
General