English-20
H RESOLUTION Adjusts the horizontal size of the image.
INPUT VGA, RGB/HV only Press + button to expand, and press - button to narrow the width of the image on the screen.
V RESOLUTION Adjusts the vertical size of the image.
INPUT VGA, RGB/HV only Press + button to expand, and press - button to narrow the width of the image on the screen.
INPUT RESOLUTION Selects to decision of input signal timings 1024x768, 1280x768, 1360x768 and 1366x768 if there is a detection
INPUT VGA, RGB/HV only problem. If no problem is detected, the only available option will be “AUTO”.
ADJUST RESET Resets the all settings within the ADJUST menu back to factory setting.
BALANCE Adjust the balance of L/R volume.
TREBLE To accentuate or reduce the high frequency sound. Press + to increase, press - to decrease.
BASS To accentuate or reduce the low frequency sound. Press + to increase, press - to decrease.
AUDIO RESET Resets the all settings within the AUDIO menu back to factory setting.
OFF TIMER Sets the monitor to power off after a length of time.
A time between 1 to 24 hours is available.
SCHEDULE Creates a working schedule for the monitor to use.
(See “NOTE 1” on page 23 for further information).
DATE AND TIME Sets the date, time, and daylight saving region.
Setting item: YEAR/MONTH/DAY/HOUR/MINUTE/DAYLIGHT SAVING TIME
Date & time must be set in order for the “SCHEDULE” function to operate.
SCHEDULE RESET Resets the all settings within the SCHEDULE menu back to factory setting except DATE AND TIME setting.
PIP MODE Selects Picture-in-Picture mode. See page 10.
OFF Normal mode.
PIP Picture in Picture mode.
POP Picture out picture mode.
SBS ASPECT Side by side (split screen) mode, with keep aspect.
SBS FULL Side by side (split screen) mode, with full screen.
PIP SIZE Selects the size of sub-picture used in “Picture-in-Picture” (PIP) mode.
“LARGE”, “MIDDLE” and “SMALL” are available.
PIP AUDIO Selects the sound source in PIP mode.
PIP H-POSITION Determines where the PIP appears on the screen.
PIP V-POSITION Determines where the PIP appears on the screen.
TEXT TICKER
MODE Enables Text Ticker and allows you to set Horizontal or Vertical direction.
POSITION-H Selects the horizontal location of the Text Ticker on the screen.
POSITION-V Selects the vertical location of the Text Ticker on the screen.
SIZE Determines the size of the Text Ticker in relationship to the overall screen size.
BLEND Sets the transparency of the Text Ticker (10: transparent, 100: opaque).
DETECT Enables auto-detection of the Text Ticker.
FADE IN Enables fade-in of the text ticker when DETECT is AUTO.
SUB INPUT Selects sub picture input signal.
PIP RESET Resets the all settings within the PIP menu back to factory setting.
LANGUAGE Selects the language used by the OSD from seven languages.
ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO/SVENSKA/
OSD TURN OFF Turns off the OSD after a period of inactivity. The preset choices are 5 - 120 seconds.
PIP
AUDIO
SCHEDULE
OSD
To Next Page
Loading...
Need help?
General