To Next Page

To Previous Page

Issue 1.0

SL2100 DT920 (ITK-8LCX) User Guide 13

3.4.2 DSS/One-Touch Keys

Programmable Function Keys can be assigned as DSS (Direct Station

Selection) or One-Touch Keys. You can place an Outside / Intercom Call by

just pressing this key without dialing the number.

 To change the Trunk Access Code, Ask your NEC Authorized

Supplier for the details.

 In the default setting, Programmable Function Key No. 1 to 12 is

assigned as “Trunk” Key. If you want to assign DSS Keys at the

unused Trunk Keys, these unused keys should be erased by 752 +

000 operation before the above operation.

 In case of DSS Key, the extension status can be indicated on the BLF.

(idle : extinguished, Busy : lit).

 When you register a telephone number, the Trunk Access Code

should be added in front of the number.

 Up to 36 digits dialing can be registered, but the name can not be

registered.

 If you want to continue the operation, press Programmable Function

Key instead of Speaker Key to finish.

 One-Touch Keys can be assigned by Soft Key operation as well.

Figure 9 DSS/One-Touch Keys

NEC SL2100 User Manual

Other manuals for NEC SL2100