en Operating the appliance
12
5. Use the & button to navigate to the next line.
6. Use the ( or ) button to select the current month.
7. Use the % button to return to "Month".
8. Use the ) button to select the next setting.
9. Use the & button to navigate to the next line.
10. Use the ( or ) button to select the current year.
11. Use the % button to return to "Year".
12. Use the ) button to apply the settings.
The initial use is complete.
Notes
■ You can change these settings at any time in the
basic settings. ~ "Basic settings" on page 15
■ After connecting the appliance to the power or
following a power cut, the settings for initial use are
shown in the display.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
1. Remove the accessories from the cooking
compartment.
2. Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3. Before heating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
4. Use the # touch button to switch on the appliance.
5. Set the specified type of heating and temperature,
then start the appliance. ~ "Setting and starting the
appliance operation" on page 12
6. Keep the kitchen ventilated while the appliance is
heating.
7. Use the # touch button to switch off the appliance
once the specified time has elapsed.
8. Wait for the cooking compartment to cool down.
9. Clean the smooth surfaces with soapy water and a
dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Oper at i ng the appl i ance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Touch the # touch button to switch the appliance on or
off.
After switching off the appliance, on the display you can
see if the residual heat in the cooking compartment is
high or low.
Notes
■ Certain displays and notes, such as the residual heat
in the cooking compartment, remain visible on the
display even when the appliance is switched off.
■ After an appliance operation, the cooling fan runs on
audibly until the cooking compartment has been
cooled as far as possible.
■ Switch off your device when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Setting and starting the appliance operation
Example: CircoTherm hot air ‚ at 170 °C
1. Touch the # touch button to switch on the
appliance.
You are taken directly to the ¢ menu for the types
of heating.
Settings
Type of heating
CircoTherm ‚
Temperature Maximum
Cooking time 1 hour
Display Meaning
-H- Residual heat high (above 120 °C)
-h- Residual heat low (between 60 °C and 120 °C)
&
&LUFR7KHUP
To Next Page
Loading...
Need help?
General
