en Troubleshooting
44
Fault Cause and troubleshooting
Remnants of food on
tableware.
▶ Arrange tableware so that it does not obstruct
spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms →Page40.
Filters are soiled.
▶ Clean the filters.
→"Cleaning filters", Page39
Filters are inserted incorrectly and/or not engaged.
1. Insert the filters properly.
→"Filter system", Page39
2. Engage the filters.
Washing programme selected too weak.
▶ Select a more intensive washing programme.
→"Programmes", Page17
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶ Only remove large remnants of food and do not
prerinse tableware.
Tall narrow receptacles in corner areas are not rinsed
adequately.
▶ Do not position tall narrow receptacles at too great
an angle or in corner areas.
Top baskets on right and left are not set to same
height.
▶ Set the upper basket on the left and right to the
same height.
→"Top basket", Page20
To Next Page
Loading...
Need help?
General
