Installation and connection en
13
Electrical connection
Connecting the appliance to the
electricity supply
Notes
¡ Please follow the "Safety instruc-
tions" →Page4.
¡ Connect the appliance to alternat-
ing current only, in the range of
220 - 240V and 50Hz or 60Hz.
¡ Please note that the water safety
system is only functional if there is
a power supply.
1. Insert the non-heating appliance
plug of the power cable into the
appliance.
2. Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3. Check that the mains plug is inser-
ted properly.
To Next Page
Loading...
Need help?
General
