2
1
EN
KR
11
The water tank arm
can be rotated and
positioned at the back,
to the le or to the
right hand side of the
machine.
Remove the water
tank, then remove the
capsule container by
sliding it sideways.
Remove the water tank by tilting it slightly backwards, then gently pulling it
up. Put the water tank in position by placing it vertically onto its arm, until
there is a ‘click’ sound.
Place the capsule container in the back of the machine by sliding it sideways
into position. It is held in place by a magnet. Place the water tank back.
MACHINE HANDLING /
WATER TANK /
CAPSULE CONTAINER /
WARNING: Be careful when removing the water tank since the
machine may tilt during the movement.
1
1
2
2
To Next Page
Loading...
Need help?
General
