3 sec.
3 x
/
3 sec.
3 sec.
EN
KR
20
RESET TO FACTORY SETTINGS /
NOTE: Choose Special Function by pressing the lever down: 1 time for
"Descaling". 2 times for "Emptying the system". 3 times for "Reset to factory
seings".
NOTE: Choose function within 2 minutes or else the machine will go
back to Ready mode. ORANGE light will blink 3 times every 2 seconds,
indicating the “Factory reset” function.
NOTE: It is possible at any time to exit the Special Functions menu
by pushing the buon and pressing the lever down at the same time for
3 seconds. GREEN steady light indicates the machine is ready.
NOTE: the machine will blink 3 times every
2 seconds until the buon will be pressed.
Turn the machine "OFF" by pushing the lever
down for 3 seconds.
Choose function by pressing the lever down:
- 3 times for "Reset to factory seings"
To enter "Factory seings" mode, push the
buon and the lever down at the same time for
3 seconds. ORANGE steady light indicates entry
into the Special Functions menu.
Push the buon to confirm. ORANGE light will
blink 3 times in 3 seconds to confirm reset
is done and then go to steady GREEN. The
machine is now ready to use.
1
3
2
4