Netafim SANDSTORM User Manual

CONTENTS
Introduction
Aim of this manual
Safety instructions
Tools required for maintenance and troubleshooting
Flange connection
Filtration system components and structure - single-chamber
Filtration system components and structure - double-chamber
Initial operation and adjustment
Maintenance
Once a week
Once every three months
At the end of the irrigation season
At the beginning of the next irrigation season
Algae and bacterial growth control
Replacing the media
Replacing the batteries in the BackFlush controller
Paint retouching of the tanks and manifolds
Cleaning the secondary filter
Troubleshooting
If the pressure difference across the filtration system is over 0.7 bar (10.15 PSI)
and the flushing cycle does not reduce it
If the flushing cycle does not start but the controller is initiating the flushing signal
and the solenoids are reacting (“clicking”)
If the media is running out through the backwash manifold during backwash
If media is running out through the outlet manifold during filtration
Replacement parts
Tanks - single-chamber
Tanks - double-chamber
Manifold sections
Manifolds accessories
Grooved couplings
Support legs
Control kit
Backwash 3-way hydraulic valve 2"
Backwash 3-way hydraulic valve 3"
Backwash 3-way hydraulic valve 4"
Backwash flow-control valve
BackFlush controller
DC actuator valve
Air Valve
Inlet adaptor pipe
Secondary filter
Warranty
4
4
5
5
6
7
8
10
10
11
12
13
14
15
16
16
18
18
18
19
20
22
24
25
25
26
27
28
30
32
34
35
35
35
36
36
37

Netafim SANDSTORM Specifications

General

Brand	Netafim
Model	SANDSTORM
Category	Water Filtration Systems
Language	English