Netafim SANDSTORM User Manual

SANDSTORM
™
SINGLE-/DOUBLE-CHAMBER USER MANUAL 5
INTRODUCTION
Handling sodium hypochlorite (NaClO) or hydrogen peroxide (H
2
O
2
)
WARNING
Sodium hypochlorite (NaClO) and hydrogen peroxide (H
2
O
2
) are dangerous toxic and corrosive
chemicals. All application regulations and safety rules must be observed. Store and handle them
according to safety regulations.
Before handling sodium hypochlorite (NaClO) or hydrogen peroxide (H
2
O
2
) , carefully read all the
specific safety, health protection and first aid information and instructions.
Be sure you have all
required first aid at the site, as instructed
.
Concentrated liquid sodium hypochlorite (NaClO) or hydrogen peroxide (H
2
O
2
) can damage exposed
metal (especially threads that are exposed to water). Be careful when applying them and avoid the
spillage of any of the liquid onto exposed metal parts. Should any of the liquid come into contact
with metal parts, immediately wash thoroughly with fresh water.
Tools required for maintenance and troubleshooting
• No special tools are needed. A standard toolkit is adequate.
• To connect grooved couplings: The following wrenches are required:
Grooved coupling size Bolt and nut size
(mm)
Wrench size
(mm)
inch mm
2 50 M10 17
3 80 M12 19
4 100 M12 19
6 150 M16 24
8 200 M20 30
10 250 M22 34
• To connect flanges: The following wrenches are required:
Flange size Bolt and nut size Wrench size
up to 8" 5/8" 15/16"
10" to 14" 7/8" 1.1/8 "
Flange connection
In most cases, the filtration system manifolds are connected to the main line with flanges.
ATTENTION
When connecting flange pipe connectors, do not forget to place the rubber gasket in place.

Netafim SANDSTORM Specifications

General

Brand	Netafim
Model	SANDSTORM
Category	Water Filtration Systems
Language	English