Setting Up Your
Powerline Adapters
Connect one end of the supplied Ethernet cable into the LAN Ethernet port
of your modem/router.
Connect the other end of the cable into the Powerline Adapter with the AC
pass-through socket.
Connect the Powerline Adapter to a power point near your modem/router.
At this point, you can plug another electrical appliance into the Powerline
Adapters AC pass-through if you wish to do so.
NOTE: For best performance plug your Powerline Adapters directly into the wall. Do not connect to a powerboard.
To Next Page
Loading...
Need help?
General
