NetComm NP206 User Manual

You can connect multiple wireless devices, including laptops, desktops and PDA’s
to your Powerline Adapter by following the 2 basic steps
1. Using your wireless device, scan the wireless networks in your area and select
the network that is the same as the Wireless SSID that is listed on the sticker
on the back of the device. Then click connect. The Wireless SSID will be in the
format NetComm_XXXXXX where X can equal letters or numbers
2. Enter the wireless security key for your device. The unique security key will
wireless SSID)
.
Establishing Wireless Connection
2
be 64XXXXXX (Where the X’s are the same letters and/or numbers in your
. Alternatively in later NP206 releases the default wireless security key
is set to be "a1b2c3d4e5" (no quotations).

NetComm NP206 Specifications

General

Brand	NetComm
Model	NP206
Category	Adapter
Language	English