NTC-220 Series – Recovery via Recovery Console Guide
FA01392 v1.0 28 September 2021
Click on the Browse button.
Locate the firmware image on your computer. Firmware images always have a “.cdi” extension and the latest versions
are always downloadable from the product support page on
https://support.netcommwireless.com/products/NTC-
220%20Series
Click the Open button.
Click the Upload button to begin the transfer of the firmware file to the router.
When the file has completed uploading, click on the Install link next to the firmware image file.
To Next Page
Loading...
Need help?
General
