NETGEAR CAX30 User Manual

Factory Settings
You can return the modem router to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the modem router
for at least seven seconds. The modem router resets, and returns to the factory
configuration settings shown in the following table.
Table 5. Factory default settings
Default behaviorFeature
www.routerlogin.com,
www.routerlogin.net,
or 192.168.1.1
User login URLModem router login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
192.168.1.1LAN IPLocal network (LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to
192.168.1.254
DHCP range
Configured by the
Internet provider
DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
ISP/MSO ToD (time
of day) configuration
Time zone
ISP/MSO ToD (time
of day) server
configuration
Time zone adjusted for daylight
savings time
EnabledSNMP
Disabled (except
traffic on port 80, the
HTTP port)
Inbound (communications coming
in from the Internet)
Cable modem firewall
Enabled (all)Outbound (communications going
out to the Internet)
User Manual138Supplemental Information
Nighthawk AX6 AX2700 WiFI Cable Modem Router Model CAX30

NETGEAR CAX30 Specifications

General

Brand	NETGEAR
Model	CAX30
Category	Network Router
Language	English