NETGEAR DS104 User Manual

Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
If, for any reason, the power adapter for any of the hubs fails, please contact
NETGEAR immediately to order a replacement adapter. Use the following table
to when ordering a specific power adapter.
If you are replacing a power supply, please confirm the voltage required by
looking on the back of the hub. If you own an early version of the DS104,
DS106, or DS108 that is 5 V, please order the DS116 power supply.
Order code
DS104, DS106, DS108
PWR-002-004 Power adapter (12 V DC, 1.2 A), North America
PWR-002-005 Power adapter (12 V DC, 1.2 A), Japan
PWR-002-006 Power adapter (12 V DC, 1.2 A), Europe
PWR-002-008 Power adapter (12 V DC, 1.2 A), United Kingdom
PWR-002-010 Power adapter (12 V DC, 1.2 A), Australia
Order code
DS116
PWR-023-002 Power adapter kit (5 V DC, 5 A), North America
PWR-023-002 Power adapter kit (5 V DC, 5 A), Japan
PWR-023-002 Power adapter kit (5 V DC, 5 A), Europe
PWR-023-002 Power adapter kit (5 V DC, 5 A), United Kingdom
PWR-023-002 Power adapter kit (5 V DC, 5 A), Australia
Note:
Keep the power cord for the DS116 power supply.
A new cord is not provided.
Replacement Power Adapter

NETGEAR DS104 Specifications

General

Brand	NETGEAR
Model	DS104
Category	Switch
Language	English