Table 4. LEDs on the front panel of model GC728XP and GC752XP (Continued)
DescriptionLED
Off. The port is not delivering PoE power.
Solid green. The port is delivering PoE power.
Solid amber. A PoE fault occurred.
RJ-45 right LED
Off. No SFP module link is established.
Solid green. A valid 1 Gbps link is established.
Blinking green. The SFP fiber port is transmitting or receiving packets at 1 Gbps.
Link/ACT LED
Link and activity for SFP fiber
ports 25F and 26F (model
GC728XP) or 49F and 50F
(model GC752XP)
Off. No SFP+ module link is established.
Solid amber. A valid 1 Gbps link is established.
Blinking amber. The SFP+ fiber port is transmitting or receiving packets at 1
Gbps.
Solid green. A valid 10 Gbps link is established.
Blinking green. The SFP+ fiber port is transmitting or receiving packets at 10
Gbps.
Link/ACT LED
Link and activity for SFP+ fiber
ports 27F+ and 28F+ (model
GC728XP) or 51F+ and 52F+
(model GC752XP)
Back Panel
The back panel contains a Kensington lock for an optional security cable and an AC
power connector. All models integrate an internal power supply, require AC power,
and come with a power cord.
The back panels for models GC728X, GC728XP, and GC752X are identical.
Note: The maximum current draw varies between the models from 1A to 10A.
Figure 5. Back panel models GC728X, GC728XP, and GC752X
The back panel for model GC752XP differs from the other models.
Figure 6. Back panel model GC752XP
Hardware Installation Guide19Hardware Overview
Insight Managed 28-Port and 52-Port Gigabit Ethernet (PoE+) Smart Cloud Switch
To Next Page
Loading...
Need help?
General
