NETGEAR WN2000RPT - Universal WiFi Range Extender User Manual

22 | Chapter 2. Range Extender Network Settings
Universal WiFi Range Extender WN2000RPT
To view or change the advanced wireless settings:
From the range extender menu at http://www.mywifiext.net, under the Advanced heading,
select Wireless Settings. The following screen displays:
You can view or configure the following settings:
• Enable Wireless Access Point. Enable the extender to work as a wireless access point.
If this check box is cleared, then computers or wireless devices cannot connect wirelessly
to the extender.
• Enable SSID Broadcast. Enable the extender to broadcast its wireless network name
(SSID). If this check box is cleared, then the wireless network is hidden. To join a hidden
wireless network, you have to type the wireless name.
• Disable Device’s PIN. Selecting this check box disables the extender’s PIN. The PIN can
be used for a WPS wireless connection.
• Keep Existing Wireless Settings. When this check box is selected, the settings in the
Wireless Settings screen stay the same when WPS is used for a wireless connection.
• Setup Access List. Specify a list of computers or wireless devices that are allowed to
connect to the network. If you use an access list, then computers that are not on the list
are not allowed to join the wireless network.

NETGEAR WN2000RPT - Universal WiFi Range Extender Specifications

General

Brand	NETGEAR
Model	WN2000RPT - Universal WiFi Range Extender
Category	Extender
Language	English