Neuton CE6.2 User Manual

12 www.neutonpower.com
Step 2: Adjust the Handlebar Height
To keep the Mower from moving while you adjust the Handlebar, place your foot behind one of the
wheels.
1. Push down on the Handlebar Adjust Lever (Figure 2) and fold the Handlebar up to a comfortable
position for you, and then release the Lever. You can choose any of four (4) positions.
Step 3: Remove the Battery
You can quickly and easily remove the Battery from your Mower.
1. Push the Release Button back and open the Access Cover (Figure 3).
Push the Release Button back with one hand and open the Cover with the other.
2. Twist the Battery Retainer Arm either way until it is no longer blocking the Battery (Figure 4).
To help keep the Mower from rolling while removing the Battery, put one foot behind a wheel for
stability.
3. Pull the Battery straight up and remove it.
Step 4: Charge the Battery before Your First Use
You MUST charge the Battery for ten (10) to twelve (12)
hours maximum before you use the Mower for
the first time. If you do not charge it before using the Mower, the Battery’s charging capacity may
decrease.
For instructions on removing and charging the Battery, read “Chapter 5: Charging and Caring for the
Battery” before you operate the Mower.
Figure 2
TIP
Handlebar Adjust Leve
r
TIP
TIP
Figure 3 Figure 4
Release Button
Battery Retainer Arm
Access Cover

Neuton CE6.2 Specifications

General

Brand	Neuton
Model	CE6.2
Category	Lawn Mower
Language	English