Neuton CE6.2 User Manual

16 www.neutonpower.com
Step 6: Insert the Battery after Being Fully Charged
1. Orient the Battery as shown in Figure 14a. Align the black side of the Battery with the side of the
Mower housing where the label reads “Insert Battery with the black side along this edge.”
NOTE: The indentations on the bottom of the Battery must line up with the metal tabs in the bottom the
Battery compartment. A new replacement Battery now has a gold faceplate (originally black as
seen in Figures 14a and 14b below).
2. After confirming the correct orientation of the Battery, insert the Battery fully into the Battery
compartment.
3. Turn the Battery Retainer Arm back over on top of the Battery to secure it in place (Figure 14b).
IF THE BATTERY IS NOT ORIENTED CORRECTLY, IT WILL NOT FULLY DEPRESS INTO THE OPENING. IF THIS
HAPPENS, REMOVE THE BATTERY, RECHECK THE ORIENTATION, AND TRY AGAIN.
Retainer Arm
Figure 14b
F
i
gure 14a
Label

Neuton CE6.2 Specifications

General

Brand	Neuton
Model	CE6.2
Category	Lawn Mower
Language	English