20 www.neutonpower.com
⇒ Analog Voltage Gauge
The Analog Voltage Gauge (Figure 19) indicates the amount of Battery life remaining. The yellow
area indicates acceptable voltage whereas the red area indicates low voltage. You should raise
the Cutting Height or mow slower if the gauge momentarily drops into the red area. Recharge the
Battery if the gauge stays in the red area.
NOTE: The Analog Voltage Gauge will only show the Battery’s voltage when you correctly insert the
Battery in the machine and the Power/Mode Switch is in either the Mow, or Auxiliary position.
nalog Voltage Gauge
Figure 19